Tyres Europe Calls for Phased EU Tyre Digital Passports

Tyres Europe wants EU tyre digital passports introduced in stages, starting with truck and bus tyres.

Tyres Europe has called for evidence-led EU ecodesign requirements that protect tyre safety and performance, with digital product passports introduced first for truck and bus tyres.

Tyres Europe has urged the European Union to take a practical, evidence-based approach to future tyre ecodesign requirements, proposing that digital product passports should initially apply to truck and bus tyres before being extended to passenger car and light commercial vehicle products.

Speaking at the Future Tire 2026 conference in Prague on 17 November, Tyres Europe Secretary General Adam McCarthy warned that poorly designed requirements could introduce significant costs and complexity for tyre manufacturers without delivering the intended environmental benefits.

According to a conference report, McCarthy emphasised the importance of balancing environmental improvements with tyre safety, durability and performance.

The comments come as the European Commission develops potential tyre-specific requirements under the Ecodesign for Sustainable Products Regulation (ESPR), which aims to improve the sustainability and circularity of products sold within the EU.

Digital Product Passports Should Start With Commercial Tyres

One of Tyres Europe's principal recommendations is to introduce digital product passports (DPPs) in stages, beginning with truck and bus tyres.

Digital product passports are intended to provide accessible electronic information about products, supporting transparency, regulatory compliance and circular-economy activities throughout their lifecycle.

McCarthy argued that immediately introducing passport requirements across every tyre category would be impractical and economically difficult to justify.

The association instead favours a phased rollout, with passenger car and light commercial vehicle tyres following the initial commercial tyre implementation.

Tyres Europe has also called for technology-neutral requirements, allowing different technical solutions to meet the same regulatory objectives, alongside safeguards for commercially sensitive information.

For tyre manufacturers and importers, the eventual requirements could influence how product information is collected, managed and shared. For retreaders and recycling businesses, access to relevant product data could support decisions about the treatment and recovery of tyres.

The proposed rollout sequence is an industry recommendation, not an agreed EU implementation timetable.

‍

‍

Safety and Environmental Performance Must Be Balanced

Tyres Europe has also raised concerns about the possibility of future ecodesign measures addressing individual tyre characteristics without sufficiently considering their effect on overall performance.

The association argues that changes intended to improve environmental performance must not compromise fundamental safety characteristics, including grip, handling and structural integrity.

In its June 2026 position paper, Tyres Europe called for a holistic assessment of tyre sustainability, supported by representative data and clear testing methodologies.

It also warned against overlapping regulatory requirements where tyre performance characteristics are already addressed by existing or developing legislation.

Areas highlighted include tyre abrasion and endurance, where further measures could create additional compliance obligations unless carefully coordinated with the current regulatory framework.

The association supports the wider objectives of improving tyre circularity and environmental performance, but wants future requirements to remain proportionate, enforceable and compatible with European manufacturing competitiveness.

Retreading and Tyre Dimensions Under Examination

Retreading is another area being examined in the Commission's preparatory work.

The draft preparatory study identifies the growing variety of tyre dimensions as one factor making passenger car and light commercial tyre retreading more difficult.

Although tyre dimensional standards already exist, differences in actual dimensions and the range of products available can create practical challenges for retreading operations.

The study suggests that greater harmonisation of tyre dimensions could be considered if policymakers seek to increase the proportion of tyres suitable for retreading.

However, this remains an area under examination rather than an agreed requirement for manufacturers.

The discussion highlights the practical questions facing policymakers as they consider how to encourage longer tyre service life and greater material recovery without introducing unintended technical consequences.

Retreading policy is also being debated nationally. As Tyre News Media recently reported, Portugal is considering restoring an environmental levy exemption for domestically retreaded tyres.

EU Ecodesign Discussions Set to Continue Into 2027

The Commission's published project plan identifies December 2026 for initial draft working documents, followed by an Ecodesign Forum discussion scheduled for January or February 2027.

A possible call for evidence, public consultation and further impact assessment work is provisionally listed for February 2027, subject to Commission approval.

These milestones form part of the preparatory and consultation process. They do not constitute a confirmed date for adopting tyre-specific ecodesign legislation.

For tyre manufacturers, importers and retreaders, the next stage will provide an opportunity to examine the proposed requirements and assess their practical implications before any binding measures are introduced.

Available study documents can be found on the EU tyre ecodesign project website.

‍

‍

Tags: Tyres Europe, EU tyre regulations, ecodesign, ESPR, digital product passport, tyre sustainability, tyre retreading, circular economy, truck tyres, tyre manufacturing, Adam McCarthy

‍

Editorial Standards & Disclaimer
Tyre News Media is an independent industry publication. Our reporting is based on information available at the time of publication, including company announcements, regulatory filings, official data, research and other sources considered reliable.

Articles may include independent analysis and editorial interpretation. Where appropriate, company statements and third-party claims are attributed to their source. Analysis, estimates and forward-looking observations should not be read as statements of established fact.

Tyre News Media takes reasonable steps to ensure accuracy but welcomes corrections, clarifications and responses from organisations or individuals covered in our reporting. If you believe information is inaccurate or requires clarification, please contact info@tyrenews.co.uk. Material errors will be corrected as appropriate.

Commercial relationships, advertising and sponsorship do not determine Tyre News Media's editorial coverage or conclusions.

Have tyre industry news to share?

Send TNM a press release, research, data or a genuine story lead. Submissions are considered on editorial merit.

Tyre Industry Business Directory

Find tyre industry businesses

Search manufacturers, suppliers, wholesalers, service providers and industry partners across the tyre sector.

Tyre News Media Business Directory

Commercial Relationships

Industry support for Tyre News Media

TNM works with sponsors and advertisers across the tyre industry. These relationships help fund open-access journalism while editorial decisions remain independent.

TNM Sponsor

Kumho Tyre (UK) Ltd

Banner Advertiser

Davanti Tyres

Banner Advertiser

Linglong Tyre Co., Ltd

TNM Sponsor

Point S UK Ltd

TNM Sponsor

TyreSafe

TNM Sponsor

Oak Tyres

TNM Sponsor

ENVOY Tyres

Work with TNM

Support independent tyre industry journalism

Explore advertising, sponsorship and supporter opportunities across Tyre News Media.

Work with TNM

Commercial relationships do not determine TNM editorial coverage or conclusions.